Container BESS
- Long-Life Ceramic Separator Lithium Iron Phosphate Battery
- High-Efficiency Thermal Management Technology, Minimized Temperature Difference
- Triple Fire Protection Technology Inside Container at the PACK Level
- Active Balancing Technology to Improve System Efficiency
The standardized 40-foot container energy storage solution, compliant with domestic large-scale power plant-level energy storage requirements. The energy storage system equipment adopts an integrated design within the container, with the energy storage battery cluster, battery control cabinet, distribution cabinet, and other equip- ment installed inside the container. The container system features an independent self-powering system, temperature control system, fire alarm system, door control lighting, safety evacuation system, emergency system, fire protection system, and other automatic control and security systems.
| Technical Parameters Table | ||
| Battery Parameters | Cell | 3.2V/280Ah LFP |
| Battery Module | 38.4V/280Ah(1P12S) | |
| Battery Cluster | 768V/215kWh | |
| Battery System Voltage Range | 648V–876V | |
| Battery System Energy | 2580kWh | |
| AC Parameters (Independent Inverter-Boost Cabin) | Rated Output Power | 1260kW |
| Rated Voltage (Allowed Fluctuation Range) | 400Vac(-20%–+15%) | |
| Voltage Standard | Three-Phase+ Ground (3W+PE) | |
| Rated Frequency (Allowed Fluctuation Range) | 50/60Hz±5Hz | |
| Rated Current | 910A*2 | |
| Total Harmonic Distortion of Current | 3% (rated power) | |
| Power Factor | >0.99 (rated power) | |
| Operating Mode | On-Grid Mode (supports off-grid mode) | |
| Active Power Regulation | 1 (leading) to 1 (lagging) | |
| Isolation Method | External Transformer | |
| Other Parameters | Cooling Method | Intelligent Temperature Control (battery cabin), Forced Air Cooling (PCS cabin) |
| Fire Protection | Heptafluoropropane/Hexafluoropropane | |
| Battery Storage Temperature Range | -20℃~60℃ | |
| Battery Operating Temperature Range | 0℃~45 ℃ | |
| Allowed Relative Humidity | ≤95% (non-condensing) | |
| Allowed Altitude | 3000m | |
| Protection Level | IP54 (battery cabin) | |
| External Communication Method | RS485/Ethernet | |
| Container Size (L*W*H) | 12192*2438*2591mm | |
| Container Weight | ≈30 tons | |
- Long-Life Ceramic Separator Lithium Iron Phosphate Battery
- High-Efficiency Thermal Management Technology, Minimized Temperature Difference
- Triple Fire Protection Technology Inside Container at the PACK Level
- Active Balancing Technology to Improve System Efficiency
- Advanced segmented 1500V system, significantly improving the energy density of the system
The standardized 40-foot container energy storage solution adopts an integrated con- tainer design, with a 1500V high-voltage direct current system, increasing efficiency by 2%. The energy storage battery cluster, battery control cabinet, distribution cabinet, and other equipment are installed inside the container. The container system features an independent self-powering system, temperature control system, fire alarm system, door control lighting, safety evacuation system, emergency system, fire protection system, and other automatic control and security systems.
| Technical Parameters Table | ||
| Battery Parameters | Name | Parameters |
| Cell | 3.2V/280Ah LFP | |
| Battery Module | 51.2V/280Ah(1P16S) | |
| Battery Cluster | 1280V/358.4kWh | |
| Battery System Voltage Range | 1080V–1460V | |
| Battery System Energy | 5018kWh | |
| AC Parameters (Independent Inverter-Boost Cabin) | Rated Output Power | 2500kW |
| Rated Voltage (Allowed Fluctuation Range) | 660Vac(-20%–+15%) | |
| Voltage Standard | Three-phase three-wire +ground(3W+PE) | |
| Rated Frequency (Allowed Fluctuation Range) | 50/60Hz±5Hz | |
| Rated Current | 1396A*2 | |
| Total Harmonic Distortion of Current | ≤3% (rated power) | |
| Power Factor | >0.99 (rated power) | |
| Operating Mode | On-Grid Mode (supports off-grid mode) | |
| Active Power Regulation | 1 (leading) to 1 (lagging) | |
| Isolation Method | External Transformer | |
| Other Parameters | Cooling Method | Intelligent Temperature Control (battery cabin), Forced Air Cooling (PCS cabin) |
| Fire Protection | Heptafluoropropane/Hexafluoropropane | |
| Battery Storage Temperature Range | -20℃~60℃ | |
| Battery Operating Temperature Range | 0℃~45 ℃ | |
| Allowed Relative Humidity | 95%(non-condensing) | |
| Allowed Altitude | 3000m | |
| Protection Level | IP54 (battery cabin) | |
| External Communication Method | RS485/Ethernet | |
| Container Size (L*W*H) | 13796*2896*2438mm | |
| Container Weight | ≈40 tons | |
- 45-foot container design, 45% increase in energy density.
- Semi-open thermal management design, compatible with various fire protection designs.
- Non-walk-in design, enhancing operational safety.
- Symmetrical layout, improving system thermal management efficiency.
The AiSlito electrical liquid-cooled energy storage system offers the option of a single-unit or dual-unit configuration. The single-unit configuration utilizes a 20-foot container with a capacity of 3000kWh and a 1500V DC system. The dual-unit configura- tion combines two units in a 40-foot container with a capacity of 6000kWh and a 1500V DC system. The single-unit configuration weighs 30 tons, has a height of 2896mm, and a length of 6058mm, meeting road transportation standards without requiring special permits from transportation management departments. The battery rack is integrated with the container, with a length of 6 meters and high strength, eliminating the need for specially designed lifting equipment and addressing container deformation issues during lifting and transportation. The compartment reserves space for a battery clus- ter, which can accommodate a fully loaded single-unit capacity of up to 3357kWh or accommodate the installation of a 250kW inverter to meet user-side application requirements.
| Technical Parameters Table | ||
| Battery Parameters | Cell | 3.2V/280Ah LFP |
| Battery Module | 51.2V/280Ah(1P16S) | |
| Battery Cluster | 1280V/358.4kWh | |
| Battery System Voltage Range | 1080V-1460V | |
| Battery System Energy | 5018kWh | |
| AC Parameters (Independent Inverter-Boost Cabin) | Rated Output Power | 2500kW |
| Rated Voltage (Allowed Fluctuation Range) | 660Vac(-20%–+15%) | |
| Voltage Standard | Three-phase three-wire+ground(3W+PE) | |
| Rated Frequency (Allowed Fluctuation Range) | 50/60Hz±5Hz | |
| Rated Current | 1516A*2 | |
| Total Harmonic Distortion of Current | ≤3%(rated power) | |
| Power Factor | >0.99 (rated power) | |
| Operating Mode | On-Grid Mode (supports off-grid mode) | |
| Active Power Regulation | 1 (leading) to 1 (lagging) | |
| Isolation Method | External Transformer | |
| Other Parameters | Cooling Method | Intelligent Temperature Control (battery cabin), Forced Air Cooling (PCS cabin) |
| Fire Protection | Heptafluoropropane/Hexafluoropropane | |
| Battery Storage Temperature Range | -20℃~60℃ | |
| Battery Operating Temperature Range | 0℃~45 ℃ | |
| Allowed Relative Humidity | ≤95%(non-condensing) | |
| Allowed Altitude | 3000m | |
| Protection Level | IP54(battery cabin) | |
| External Communication Method | RS485/Ethernet | |
| Container Size (L*W*H) | 2*(6058*2438*2896mm) | |
| Container Weight | ≈60 tons | |
| No. | Item | Parameters | ||
| Model | WES-C2150/1000-A01 | WES-C1290/0500-A01 | WES-C0645/0250-A01 | |
| 1 | Rated Capacity | 2150kWh | 1290kWh | 645kWh |
| 2 | Rated Power | 1000kW | 500kW | 250kW |
| DC Parameters | ||||
| 3 | Cell | 3.2V/280Ah( LFP ) | ||
| 4 | Battery Module | 38.4V/280Ah | ||
| 5 | Battery Cluster | 768V/215kWh | ||
| 6 | Battery System Voltage Range | 648V~876V | ||
| AC Parameters | ||||
| 7 | AC Connection Method | Three-Phase Four-Wire | ||
| 8 | Isolation Method | Built-in Transformer | ||
| 9 | Rated Grid Voltage | 400Vac | ||
| 10 | Allowed Grid Voltage Range | -20%~15% | ||
| 11 | Rated Grid Frequency | 50/60Hz | ||
| 12 | Allowed Grid Frequency Range | ±5Hz | ||
| 13 | Total Current Harmonic Distortion | 3% (rated power) | ||
| 14 | Power Factor | >0.99 (rated power) | ||
| 15 | Power Factor Adjustment Range | 1 (leading) to 1 (lagging) | ||
| 16 | Off-Grid Mode | Supported (optional) | ||
| Other Parameters | ||||
| 17 | System Efficiency | Power Efficiency ≥97%, Energy Efficiency ≥89% | ||
| 18 | Protection Level | IP54 (battery cabin) | ||
| 19 | Battery Storage Temperature Range | -20℃~60℃ | ||
| 20 | Battery Operating Temperature Range | 0℃~45 ℃ | ||
| 21 | Cooling Method | Forced Air Cooling | ||
| 22 | Allowed Relative Humidity | ≤95% (non-condensing) | ||
| 23 | Allowed Altitude | 3000m | ||
| 24 | Communication Interface | RS485/Ethernet | ||
| 25 | Dimensions | ≈40 tons | ≈30 tons | ≈20 tons |
| 26 | Weight | 30 FT | 20 FT | 13 FT |
- All-in-one Minimalist Design
- Module Temperature Difference ＜3 ℃
- Active Safety Technology
The AiSlito Electrical Liquid-cooled Battery Energy Cube adopts a standardized and modular minimalist design. The system integrates multiple proprietary technologies and features a standardized battery module, unique air channel design, and the comprehen- sive use of phase-change materials, resulting in a module temperature difference of less than 3°C. The internal battery cells within the module are connected in series with- out interconnections, allowing the Battery Management System (BMS) to monitor the condition of each individual cell. This multidimensional enhancement improves the safety of the energy storage system and enables flexible configuration, application in various scenarios, precise management, and rapid operation and maintenance. The AiSlito Electrical Liquid-cooled Battery Energy Cube is widely utilized in various “energy storage+” applications
| Technical Parameters Table | ||
| Battery Parameters | Name | 3.2V/280Ah LFP |
| Cell | 153.6V/280Ah(1P48S) | |
| Battery Module | 614.4V/172kWh | |
| Battery Cluster | 538V–700V | |
| Battery System Voltage Range | 344kWh | |
| Battery System Energy | 100kw | |
| AC Parameters (Independent Inverter-Boost Cabin) | Rated Output Power | 380VAC |
| Rated Voltage Rated Frequency | 50/60Hz | |
| Rated Current | 152A | |
| Power Factor | -2 | |
| Overload Capacity | 1.1 times long-term operation, 1.2 times for 1 minute | |
| Cooling Method | Liquid cooling | |
| Protection Level | IP65 | |
| Other Parameters | System Cooling Method | Liquid cooling |
| Operation Efficiency | 94% (rated capacity) | |
| Battery Storage Temperature Range | -10℃~40℃ | |
| Battery Operating Temperature Range | 0℃~45 ℃ | |
| Allowed Relative Humidity | ≤95% (non-condensing) | |
| Allowed Altitude | 2000m (without capacity reduction) | |
| Protection Level | IP54 | |
| External Communication Method | RS485/Ethernet | |
| Container Size (L*W*H) | 1540*1230*2400 | |
| Container Weight | ≈2.6 tons | |
